ลวด OKI OS - Z typ

ลวด OKI OS - Z typ
  • หมวดหมู่ : ลวดวายคัต EDM wire
  • รหัสสินค้า : 000305

รายละเอียดสินค้า ลวด OKI OS - Z typ

   ลวด OKI รุ่น OS-Z


    เป็นลวดพิเศษพัฒนามาเพื่อใช้กับเครื่อง high-speed และรุ่น automatic ตัดงาน finishing และตัดงานละเอียดThis Z type is a zinc-coated brass wire. Its high tensile strength allows smoother surface and more precise cuts than bare brass wire. The Z type wire guarantees high reliability andproductivity in automatic operation. 

Zinc-coated wire OS-Z wire


*This zinc-coated wire consists of brass wire electroplated with high purity zinc. The high plating
 accuracy realizes faster machining speed and also provides a better surface finish on the work piece.
*The high purity zinc layer formed on the surface of the brass by means of our unique electroplating
  technology realizes higher machining speed.    
*By uniformly coating the surface of the wire with zinc, which has good discharge characteristics,
 it is possible to create a finer discharge compared to when using general brass wire. In the 
 finishing process, improved surface roughness and a better machined profile are obtained,
 resulting in high cost performance.     
*Almost no copper adheres to the work piece.    
*The zinc coating method is a method of coating by electroplating. It is not a method in 
  which is wire is dipped in molten zinc.     
*A high purity uniform zinc layer can be obtained.    
*The discharge is stable and free of irregularities.    

Impurities are kept to the minimum, thus preventing deterioration of performance.



Wire diameter symbolType symbolStandard wire diameter
Wire diameter tolerance
Tensile strength
Fracture load